Product Description
1. Hydraulic entry coil car
The car can move levelly and vertically,which is convenient for putting the steel coils into the
Decoiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by cycloid motor.
The capacity it can carry is 5 Tons .
2. Hydraulic de-coiler
Supporting the coils and doing uncoiling.
It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever.
7.5 motor drive the coils running and can do forward and reverse running as well as do the
decoiling with tension.
The core can ensure the expand range φ508 of the coils inner diameter.
Structure: welding by the steel plates and profiled bar.
The capacity is 5Tons .
3.Straightening machine
It is composed of 17 leveling rollers, 2 groups of supporting rollers, driving device and 2 pinch code rollers and frame. Both sides of each rolling wheel is transmitted by needle pins all are the main force rollers. The total quantity of the rollers is 19, the diameter is φ84 and the distance between the rollers is 90mm, with supporting rollers. All the rollers are after hard chrome plating to protect the stainless steel plate surface is not wear.
The function of the supporting roller is to balance the leveling rollers force and reduce the friction to the rollers.
The working rollers can be adjusted the gap electrically which is controlled by 2 hand wheel to ensure the leveling quality.
Driving model: all the independent rollers and gear box are driven by 30Kw frequency control motor.
4.Shearing machine
Shear model: cut from up to down hydraulically which is cooperate with the signal direct from the feeder and shear automatically.
Adopt gap adjusting design to cut the materials and can shear 2.5mm steel plate safely after heat
treatment.
5.X-shaped hydraulic stacker
The length of plates can range from 300-300mm (which can be customized)
The width cab be ranged from 500 to 1500mm.
Contact Now
